Endurance Rides & Event Schedule
Frequently asked Questions
|
Tying the Knot |
|
|
|
Adjusting Halters The knots on the halters are all movable. Just push them together to loosen (must be clean) and slide knot one way or the other. By doing this, you can make the nose larger or smaller. Where there are two matching knots make sure that they are even. Instructions to make your own rope halter: http://www.goddijn.com/halter/ |
Rope Sizes
|
Diameter |
3/16" |
1/4" |
3/8" |
7/16" |
1/2" |
5/8" |
3/4" |
|
Circumference |
9/16" |
3/4" |
1-1/8" |
1-1/4" |
1-1/2" |
2" |
2-1/4" |
CARE OF YOUR ROPE PRODUCTS
Your rope products can either be washed by hand or soaked for a short time in the washing machine. You only need to agitate for a minute or so. Prolonged agitation may cause the core to push through the outer covering or cause shrinkage. Use of a lingerie bag will keep halters from tangling. Remove from machine, rinse & hang to dry. Do Not wash in hot water.
PLEASE NOTE: IT IS UNSAFE TO LEAVE A ROPE HALTER ON A LOOSE HORSE!
WE ARE NOT RESPONSIBLE FOR DAMAGE YOU MAY HAVE CAUSED, OR MISUSE OF OUR ROPE PRODUCTS!
